• Sewn-in, multi-sensor motion co-processor for precise, real-time body motion reconstruction 20/1/2012

  STMicroelectronics has released a smart suit prototype with sewn-in, multi-sensor iNEMO motion co-processor that recognises complex movements of the wearer’s body and translates them to a digital model with high precision and speed. The iBMR (iNEMO body ....

  Second generation, 10W LED arrays feature luminous flux of up to 900lm and colour rendering index of 82 20/1/2012

  The second generation of the 10W Mini Zeni LED arrays from Sharp are suitable for lamps, lighting fixtures, spot lighting and LED retrofit lamps. The LED arrays measure 15x12x1.6mm, along with an aluminium ceramic plate as carrier material. The flat ....

  RF switch is suitable for the immunity test system 12/1/2012

  Teseq has added the SW 6012 RF switch to its ITS 6006 immunity test system. The RF switch adds two single pole double throw switches to the switching network of the immunity test system. It is powered and controlled by the immunity test system. Interlock ....

  Dual-core gyroscope for handling smart user interface and image stabilisation in phones and tablets 12/1/2012

  STMicroelectronics has introduced the L3G4IS dual-core gyroscope that is said to handle both user-motion recognition and camera image stabilisation. A single gyroscope is suitable for use in mobile phones, tablets, and other smart consumer devices. ....

  Two-wire Hall-effect latch offers protection against high-voltage transients 12/1/2012

  Allegro MicroSystems has introduced the A1244, a two-wire Hall-effect latch that features on-chip transient protection and a zener clamp to protect against over-voltage conditions on the supply line. The latch, which is programmed to optimise the magnetic ....

  FPGA interoperated with PCIE gen3 switch for development of PCIE gen3 systems 26/12/2011

  Altera has interoperated its 28nm Stratix V GX FPGA with PLX Technology’s ExpressLane PCIe (PCI Express) Gen3 switch. The FPGAs feature up to four hard PCIe Gen3 x8 IP blocks, which support one, two, four and eight lane configurations and provide transfer ....

  Switch filter modules with five linear paths for cellular and GSM handset applications 26/12/2011

  According to the RF Micro devices, its RF1293 and RF1293A switch filter modules offer low insertion loss along with good linearity performance and are suitable for multi-mode GSM, enhanced data rates for GSM evolution, LTE, wideband code division multiple ....

  Single-chip graphics LCD microcontrollers and freescale mobile 26/12/2011

  Freescale Semiconductor has introduced an ARM Cortex-M4 core based microcontroller family, the Kinetis K70, designed for single-chip, graphics LCD applications. The microcontrollers are suitable for applications that require a sophisticated graphics ....

  Integrated MOSFET buck regulators for PoL applications 26/12/2011

  Micrel has rolled out its SuperSwitcher II family of integrated MOSFET buck regulators for high power density DC/DC applications. The MIC26xxx family comprises six DC/DC buck regulators leveraging the company’s proprietary HyperSpeed Control and HyperLight ....

  Optimised scalable PCB connector for electronic applications 26/12/2011

  TE Connectivity has introduced a one-piece compressive BtB (board-to-board) connector, which enables connecting to a locally gold-plated secondary board by compression of the contacts. The BtB connector is made of high temperature thermal plastic and ....

[1]    2    3    4    5    6    7    8    Next