•  
• EDN Europe MAGAZINE
•  
• Free SUBSCRIPTION
• Subscription Renewal
• View Media Kit

• EDN
• EDN Australia
• EDN Asia
• EDN China
• EDN Japan

Drive a blue LED from a 3V battery

Using a blue LED can pose problems when available powersupply voltages don't meet or exceedthe LED's 3V forward-voltage drop.

This Design Idea shows how to drive a blue LED from a 3V battery or another power supply. The circuit in Figure 1 uses the ON Semiconductor (www. onsemi.com) NCP1729 voltage inverter, IC1, to produce enough voltage to drive blue LED D1. Transistor Q1 serves as a constant-current limiter for the LED's forward current. When current through the LED and RS increases to a level that develops enough baseemitter voltage to turn on Q1, Q1's collector draws current from the voltage divider comprising R1 and R2 and forces IC1 to shut down. The voltage inverter restarts when the voltage drop across RS falls below Q1's base-emitter turn-on threshold. Pulling transistor Q2's base to ground through R2 turns on the circuit.

Click here to view figure.

In this application, the LED exhibits a voltage drop of approximately 3.3V at 10 mA forwardbias current. Table 1 illustrates the LED's applied voltage, VBAT|VOUT|, and Q1's base-emitter voltage for various battery-voltage values.