The open frame module provides a full 66 W of 3.3 V power @ 55C & 200lfm of airflow – ideal for distributed power architecture applications or as a fully regulated intermediate bus converter. The module is compliant with DOSA footprint and interface standards and has a wide input voltage range of 36 to 75 VDC & provides 2250 VDC input to output isolation.
The CPT20F48 is a high efficiency module with efficiencies exceeding 90% from ½ load through full load. The module meets EN 60950 basic insulation requirements and is UL94 V-0 flammability rated. The module complies with all of the typical industry requirements including no load operation, 100 V/100 mS input voltage transient and pre-biased load startup.
Other features include: fixed-frequency operation, auto-restart OVP, OCP & OTP protections, UVLO, remote sense and +10%/-20% output voltage trim using industry standard equations. Remote ON/OFF is standard with positive or negative logic options available.
The module features a standard 16th brick pinout and dimensions of 1.3 inch L x 0.9 inch W (33 mm x 22.9 mm.) The device has a maximum height of 9.5 mm (0.375 inch) which accommodates tight card spacing with minimal airflow blockage of downstream components.
Visit Semiconductor Circuits at www.dcdc.com