3GPP approves lower Power Class 5 (20 dBm) for NB-IoT applications

April 22, 2016 // By Graham Prophet
Wireless and positioning-systems vendor u-blox (Thalwil, Switzerland), together with collaborator and IoT connectivity company Neul (Cambridge, UK) reports success in promoting the concept of an extra power class for devices used in Narrowband-IoT (NB-IoT) applications.

As a result, a maximum transmit power of 20 dBm has been approved on the occasion of the latest 3GPP RAN working group meeting, in the run-up to the 3GPP Release 13 of NB-IoT standards in June. This additional power class with lower maximum transmitted power could help to reduce the peak current consumption from the battery, hence enabling NB-IoT to be suitable for a wider range of IoT applications, such as wearables and tracking.


NB-IoT is a Low Power Wide Area (LPWA) technology for IoT applications, available for deployment over existing mobile networks, in licensed radio spectrum. These applications have low data rates, require long battery lives and operate unattended for long periods of time, often in remote locations. In many use cases of NB-IoT applications, no local power supply is available, either for convenience (water meter, tracker, covert security sensor, outdoor sensor) or safety (gas meter) reasons. Batteries for long life applications, up to 10 years for some utility meters, are therefore crucial. They must also be small to fit into all IoT devices and be able to operate at very low temperatures.


For more information about NB-IoT at u-blox: https://www.u-blox.com/en/narrowband-iot-nb-iot