Accurate non-contact current measurement uses Rogowski coils principle

May 16, 2013 // By Julien Happich
Power Electronic Measurements' latest generation of Rogowski coils for non-contact current measurement, is designed specifically for monitoring advanced power systems and semiconductors.

The CWT Ultra-mini probe offers higher maximum frequency and increased stability over a wider operating temperature range. The CWT Ultra-mini current transducer is a powerful development or diagnostic instrument for examining switching waveforms, ripple currents, transients or harmonics. The extended temperature range of -40°C to +125°C and improved temperature coefficient of 50ppm/°C allow accurate measurement of semiconductors operating at increased temperatures. In addition, the wider 3dB bandwidth of 30MHz enables engineers to analyse high-order harmonics in systems operating at high switching frequencies, or accurately monitor switching waveforms with rapid rise-times. The coil has a cross section of 1.6mm, allowing users to take measurements at locations that are difficult to access. It can be positioned between the pins of MOSFETs or IGBTs in packages such as TO-220 or TO-247.

The complete CWT Ultra-mini range comprises several variants suitable for measurements from as low as 1A to a maximum full-scale current of 6000A. The new family also has enhanced transient response, and can measure fast-changing currents up to 80 kA/µsec and has typical measurement accuracy of ±2%.

Power Electronic Measurements; www.pemuk.com