The technique receives the data from the actual receiver and buffers it in the memory. This approach allows users to visualise and extract any signal in the entire memory depth without having to interrupt recording. All new data provided by the sensor is continuously recorded, even as users work with signals, which are minutes, hours or even days old.
The Signal Archive facilitates sharing receiver hardware between multiple clients by adding an additional software layer between the clients and the actual receiver hardware. One Signal Archive can receive data from multiple receivers. For standard applications, the IZT R3000 signal archive can reside on the customer’s IT system. For more demanding requirements in terms of speed and number of clients, IZT can supply dedicated sensor controller hardware.
The IZT R3000 Signal Archive offers a large number of Digital Down Converters (DDCs) for the users to access individual signals in parallel. Centre frequencies, bandwidths and start times are independent. A typical scenario may comprise a small number of broadband IQ streams for automatic detection and modulation recognition listening at or near real-time. In parallel several ten or even hundreds of narrow band streams are recorded. This enables detailed analysis both on signals that have been recently received or stored at real-time.
The Archive reliably receives all UDP data packets from the receiver and stores them in a large RAM buffer in the sensor controller, acting as a large First-In-First-Out (FIFO) memory. Disc arrays can be added to the sensor controller, further increasing buffer size and allowing for long-term storage of signals, either selectively or over the full instantaneous bandwidth of the receiver.
The maximum amount of data that can be stored depends on the RAM and disc size of the mass storage attached to the sensor controller. The total number and bandwidth of streams that can be extracted in real-time depends on the processing power of the sensor controller, with different performance