ESP electronic control units with integrated inertial sensors have no need for complicated wiring to connect to external sensors. A biaxial acceleration sensor and a monoaxial yaw sensor together give the SMI650 fully fledged ESP senses for monitoring a vehicle's three axes of motion. The first series-production version of the new combined inertial sensor will be incorporated in Bosch’s current generation 9 ESP electronic control units.
The current trend in automotive sensor technology is to use combination sensors. This makes sense because integrating various sensor elements in one housing makes their handling, fitting, and electrical connections considerably more straightforward – with a resulting reduction in costs. But a combination sensor such as the SMI650 has to be able to cope with more challenging conditions, since it has to make the transition from the comfort of the passenger compartment to a car’s “torture chamber”: the engine compartment. Here, temperatures can swing wildly from way below freezing to way above the boiling point of water, while the sensors must avoid misinterpreting the strong vibrations caused by a huge variety of engine types as unstable driving conditions.
In order to shield the SMI650’s sensor elements against such sources of interference, the PM28D sensor housing has been fitted with a vibration damper. Its base plate is enveloped in a specially developed silicone material, isolating the sensors from background vibrations. But that is not all: Bosch engineers have also provided the tiny acceleration sensor structures with micromechanical dampers. Together with the optimized component’s own ASIC an up to now unmatched robustness of the sensor was realized. Therefore it is well suited for the integration in units.
For more information about Bosch automotive sensors, visit www.bosch-sensors.com.