USB 3.0 – a key-point summary

March 30, 2015 // By Abhishek Gupta
In the last 14 years, the Universal Serial Bus (USB) has become the standard interface to connect devices to a computer. Whether it’s an external hard drive, a camera, the mouse, a printer, or a scanner, the physical connection to transfer data between devices generally is a USB cable. The interface is indeed universal.

USB technology has been under development since 1993. The first official definition, USB 1.0, was introduced in 1996. It provides a Low-Speed transfer rate of 1.5 Mbits/sec for sub-channel keyboards and mice, and a Full-Speed channel at 12 Mbits/sec. USB 2.0, which came in 2001, made a leap to Hi-Speed transfer rates of up to 480 Mbits/sec. In 2010, USB 3.0 finally hit the market.

USB 3.0 or SuperSpeed USB

USB 3.0 is the third major version of the Universal Serial Bus (USB) standard for computer connectivity. Among other improvements, USB 3.0 adds a new transfer mode called "SuperSpeed" (SS), capable of transferring data at up to 5 Gbits/sec (625 MB/sec), which is more than ten times as fast as the 480 Mbit/sec (60 MB/sec) high speed of USB 2.0. Beside different connectors used on USB 3.0 cables, they are also distinguishable from their 2.0 counterparts by either the blue colour of the ports or the SS initials on the plugs.

A successor standard named USB 3.1 was released in July 2013, providing transfer rates up to 10 Gbits/sec (1.25 GB/sec, called "SuperSpeed+"), which effectively put it on par with the first version of Thunderbolt.

USB 3.0 Specifications

A number of changes have been implemented in USB 3.0 to satisfy the increased demands of external devices. Here is a quick overview of USB technology:

Transfer Rate

This new Super Speed interface provides realistic transfer rates of around 3,200 Mbits/sec or 3.2 Gbits/sec. The theoretical top signalling rate is 4.8 Gbits/sec.

Data Transfer

USB 3.0 introduces full duplex data transfer. Two of five lanes are reserved for transmitting data, while another pair is dedicated to receiving data, meaning that USB 3.0 can read and write data simultaneously at full speed. Previous USB specifications did not support bi-directional data transfer.

Data Encoding

The "SuperSpeed" bus provides for a transfer mode at a nominal rate of 5.0 Gbit/sec, in addition to the three